Breaking ground on a new commercial build? Colonial is the commercial HVAC contractor that general contractors and commercial builders rely on for commercial HVAC design and installation. We are based in Colonial Heights and serve commercial construction projects throughout Central Virginia.
From system design and load calculations to final commissioning, our NATE-certified team is ready to help.
Request a Project Consultation Request a Bid
What’s at Stake When Commercial HVAC Isn’t Sized Right
Too many installations still rely on a square-foot rule of thumb that can oversize equipment by 30-50%. In the case of new construction HVAC installation, bigger does not mean better. An oversized system short-cycles, never properly removes humidity, and wears out early.
The only way to get it right is a real load calculation.
Here are the kinds of problems that trace back to rushed or improperly designed commercial HVAC:
- Equipment that short-cycles and runs up energy bills
- Poor humidity control
- Hot and cold spots from undersized or unbalanced ductwork
- Premature equipment failure and early replacement costs
- Failed inspections
- Uncomfortable tenants, customers, and employees
- Delayed certificate of occupancy and a pushed-back opening day
When you choose to partner with Colonial for your commercial HVAC design, our NATE-certified team stands behind our work with our 100% satisfaction guarantee.
Bring in Commercial HVAC Contractors Before the System Gets Boxed In
The best time to involve commercial HVAC contractors is during planning. That gives the HVAC system room to be designed around the building.
Colonial Plumbing & Heating Co., Inc. provides new construction HVAC installation for:
- New commercial buildings
- Buildouts
- Additions
- Tenant improvements
Our team helps with commercial HVAC design, equipment selection, duct layout, ventilation planning, controls, system installation, start-up, and final turnover.
It is time to schedule new construction HVAC services when your project includes:
- Rooftop units, split systems, heat pumps, furnaces, or air handlers
- New ductwork, duct modifications, or zoning needs
- Ventilation, exhaust, or make-up air planning
- Thermostat, controls, or building comfort layout decisions
- Roof curb, ceiling, equipment room, or access coordination
- Refrigerant piping, condensate routing, or gas line coordination
- Commercial building HVAC systems for offices, retail spaces, churches, restaurants, medical offices, or light industrial spaces
The early HVAC phase is where a lot of future comfort problems are prevented.
Colonial brings a field-tested approach to commercial HVAC design and installation. We coordinate with the project team and help make sure the HVAC portion is ready.
If you are searching for new construction HVAC contractors near me for a commercial build or buildout, call Colonial at (804) 526-8415.
One Mechanical Partner for Both Your Plumbing and HVAC
On a commercial build, plumbing and HVAC need to fit into the same spaces. When two different subcontractors are running pipe and ductwork through the same chases, there are often miscommunications.
Colonial is one of the few contractors in Central Virginia that handles both. Because our plumbing and HVAC teams work under the same roof, we coordinate everything.
For a general contractor, that is one less coordination you need to worry about.
When you want your mechanical trades handled by one experienced team, call Colonial at (804) 526-8415.
Air Quality and Ventilation Considerations During New Construction HVAC Installation
On a commercial building, codes set the minimum outdoor-air requirements.
Proper ventilation and humidity control are what keep a finished building from feeling stuffy or clammy. But it also has structural implications. If your humidity is under control, you have less risk of mold issues.
Because Colonial offers a full range of indoor air quality solutions, we can engineer all of it into your commercial building HVAC systems.
Need HVAC Support Before the Project Gets Behind?
Commercial HVAC design should be part of the new build from the beginning. The earlier your commercial HVAC contractors are involved, the easier it is to plan the layout correctly.
Commercial building HVAC systems touch so many parts of the project, including:
- Roof curbs
- Ceiling space
- Duct mains
- Outside air
- Exhaust
- Condensate drains
- Gas connections
- Electrical coordination
- Thermostats
- Controls
- Service access
Colonial Plumbing & Heating Co., Inc. provides new construction HVAC installation for commercial projects. We help general contractors, owners, developers, and project managers keep the HVAC portion moving.
If you have been searching for new construction HVAC contractors near me or commercial HVAC contractors for an upcoming build, call Colonial at (804) 526-8415.
You’re Building the Commercial Project. The HVAC System Shouldn’t Be an Afterthought.
On a commercial build, HVAC is easy to put aside. However, doing so just sets you up for problems.
Here are a few things we hear before a project brings in experienced commercial HVAC contractors:
“Bring the HVAC contractor in once we’re ready to install equipment.”
By then, there is no routing for the HVAC equipment. Commercial HVAC design needs to account for a lot, and all of that must be planned ahead of time.
“Any HVAC company can install what’s on the plans.”
Commercial construction HVAC is a specialty service. The contractor needs experience in commercial construction and has to have done this before. This is not the type of project where a team can “learn on the job.”
“We can move that HVAC unit later.”
Sometimes. But moving HVAC components later can affect ductwork along with everything else regarding commercial building HVAC systems. The earlier those decisions are made, the better.
“Bigger is always safer.”
Not with HVAC. An oversized unit cools the air faster, yes that is true. The problem is that it shuts off before it pulls the humidity out. That also causes unnecessary stress on the compressor.
“We’ll deal with ventilation at inspection.”
Fresh-air requirements are set by code and vary by how the space is used. That is why all of that commercial building HVAC systems design must be handled before any of the build begins.
If you’re looking for commercial HVAC contractors that work from your blueprints alongside your team, go with Colonial.
Commercial Construction HVAC in Colonial Heights and Across Central Virginia
Colonial Plumbing & Heating Co., Inc. provides new construction HVAC installation for new builds, buildouts, additions, renovations, and tenant improvement projects throughout Central Virginia.
If you are a general contractor, property owner, developer, or project manager searching for reliable commercial HVAC contractors, our team is ready to help.
We provide commercial HVAC services throughout:
- Colonial Heights, VA
- Petersburg, VA
- Hopewell, VA
- Chester, VA
- Chesterfield, VA
- Prince George, VA
- Dinwiddie, VA
- Midlothian, VA
- Disputanta, VA
If you are searching for new construction HVAC contractors near me for an upcoming commercial build, Colonial is already working across this region. Call (804) 526-8415.
Commercial Construction HVAC FAQs
What does new construction HVAC installation include for a commercial building?
New construction HVAC installation can include:
- Commercial HVAC design
- Equipment selection
- Ductwork
- Ventilation
- Exhaust
- Make-up air
- Rooftop units
- Split systems
- Air handlers
- Controls
- Thermostats
- Refrigerant piping
- Condensate routing
- Gas connection coordination
- Start-up
- Testing
- Final turnover
The exact scope depends on the building. Colonial Plumbing & Heating Co., Inc. helps plan and install the system.
Do you handle full commercial HVAC design or just installation?
Yes, Colonial handles commercial HVAC design and installation. That means we can help with everything regarding HVAC. We can completely take that away from your plate so you can focus on other parts of your build.
What types of commercial building HVAC systems can you install?
Depending on the project, that may include:
- Rooftop units
- Split systems
- Heat pumps
- Furnaces
- Air handlers
How do I choose between new construction HVAC contractors?
Look for new construction HVAC contractors who understand the full construction process, especially for how we do things here in the Tri-Cities area. The right contractor should be able to talk through commercial HVAC design, jobsite coordination, and be a true manager of the project.
How long does new construction HVAC installation take?
For a commercial build, it depends on the size of the building and the overall commercial HVAC design strategy. A lot of it is based on the timelines of the other portions of the build.
How do I know what size HVAC system my commercial building needs?
Bigger isn’t better. An oversized system cools the air quickly but shuts off before it removes the humidity. The right way to size a commercial system is a real load calculation that accounts for the building’s insulation, windows, orientation, occupancy, and internal heat from equipment and lighting. That’s the foundation of good commercial HVAC design.
Do I need a permit for commercial HVAC design and work?
Yes. Commercial HVAC design work requires permits in every jurisdiction in our area. The good news is that we handle the permitting. Because we work throughout Central Virginia, we already know the local permitting offices and what inspectors in Colonial Heights, Chesterfield, Petersburg, and the surrounding areas expect to see.
What’s the difference between commercial and residential new construction HVAC?
Commercial buildings run longer hours and have to meet stricter codes. The equipment is different. Commercial systems face harder use, which makes correct sizing and quality installation matter even more. Restaurant kitchens bring their own ventilation and cooling demands that a standard residential approach doesn’t address.
It’s worth hiring commercial HVAC contractors who do this kind of work specifically.
We Can Help With Commercial Construction HVAC
Call Colonial Plumbing & Heating Co., Inc. today at (804) 526-8415 to discuss the HVAC scope for your new commercial build.
Our team can help with commercial HVAC design, new construction HVAC installation, and complete commercial building HVAC systems.
Call us today at (804) 526-8415. Quality service guaranteed.
